904-557-3807
tegiles@live.com
Contact us today!
Yulee, FL

Wind Mitigation Inspections

What is a Wind Mitigation Inspection?

Simply put, it saves you money on your homeowner’s insurance if your home is in an area that requires you to carry windstorm insurance. Florida homeowner’s insurance policies come at a high cost and premiums continue to climb. Having a wind mitigation inspection performed by a qualified inspector gives your insurance carrier details about the structure of your home and can reduce your insurance premium substantially.

wind mitigation report

The Inspection Process

Wind Mitigation form (OIR-B1-1802) is used to document the details of the inspection. The form covers key features about the structure of your home such as type of wall construction, how rafters are connected to the walls, roof covering, roof geometry, roof decking attachment, gable bracing (if applicable), the presence of a secondary water barrier, and opening protection for windows and doors. The current industry standards are according to 2014 Florida Building Code.

The entire process of the wind mitigation inspection takes approximately thirty to forty- five minutes. A large portion of the inspection is done in the attic taking pictures of each component so it is helpful to provide a clear path to access the attic. I also take pictures of all sides of the home so securing any pets is very important as well.

Documentation on the roof, garage door, hurricane shutters, or hurricane impact resistant windows is very important to have additional copies available for me at the time of the inspection. I will review the details of the wind mitigation inspection with you in depth. Your report is then emailed to you and your insurance agent within 24 hours.

The Wind Mitigation Inspection Form OIR-B1-1802 Is Made Up Of 7 Components:

  1. Applicable Building Code
    What building code was used to design and build the structure?
  2. Roof Covering
    When was the structures roof installed and what building code does it meet?
  3. Roof Deck Attachment
    What material was used as the Roof Deck Sheathing and how is it attached?
  4. Roof to Wall Attachment
    How is the roof system secured to the wall structure and what is the weakest connection type?
  5. Roof Geometry
    What is the shape or shapes of the roof system? Is it Hip, Gable or Flat?
  6. Secondary Water Resistance
    Does the roof system have a secondary means to protect the dwelling from water intrusion?
  7. Opening Protection
    What is the weakest form of wind borne debris protection installed on the structure?

IMPORTANT!!! A Wind Mitigation Inspection Form OIR-B1-1802 must be completed by one of the following:

  • Home inspector licensed under Section 468.8314, Florida Statutes who has completed the statutory number of hours of hurricane mitigation training approved by the Construction Industry Licensing Board and completion of a proficiency exam.
  • Building code inspector certified under Section 468.607, Florida Statutes.
  • General, building or residential contractor licensed under Section 489.111, Florida Statutes.
  • Professional engineer licensed under Section 471.015, Florida Statutes.
  • Professional architect licensed under Section 481.213, Florida Statutes.